Auflistung nach Schlagwort "Series resistances"

Sortiert nach: Sortierung: Ergebnisse:

  • Determination of the Contact Resistivity of Screen-printed Al Contacts Formed by Laser Contact Opening 
    Kranz, Christopher; Lim, Bianca; Baumann, Ulrike; Dullweber, Thorsten (London : Elsevier Ltd., 2015)
    Next-generation industrial PERC solar cells typically include local laser contact opening (LCO) of a dielectric passivation layer stack at the rear side and subsequent full-area aluminum screen printing and firing. In this ...
  • Impact of Ag Pads on the Series Resistance of PERC Solar Cells 
    Schulte-Huxel, Henning; Witteck, Robert; van Laak, Paula; Brendemühl, Till; Hinken, David; Bothe, Karsten; Brendel, Rolf (London : Elsevier Ltd., 2016)
    Screen-printed passivated emitter and rear cells (PERC) require Ag pads on the rear side to enable solderable connections for module integration. These Ag pads are separated from the silicon by a dielectric layer to avoid ...
  • Optimizing the Solar Cell Front Side Metallization and the Cell Interconnection for High Module Power Output 
    Witteck, Robert; Schulte-Huxel, Henning; Holst, Hendrik; Hinken, David; Vogt, Malte R.; Blankemeyer, Susanne; Köntges, Marc; Bothe, Karsten; Brendel, Rolf (London : Elsevier Ltd., 2016)
    Improving the light trapping in a module results in an increase in the generated current. Consequently, an optimization of the front grid metallization of the cell is required for the best trade-off between series resistance, ...
  • Single Print Metal Stencils for High-efficiency PERC Solar Cells 
    Hannebauer, H.; Falcon, T.; Cunnusamy, J.; Dullweber, Thorsten (London : Elsevier Ltd., 2016)
    Industrial silicon solar cells like Passivated Emitter and Rear Cells (PERC) typically apply a screen-printed (Ag) front contact with a single print process using a mesh screen. It has been shown that using stencils instead ...